Do-It-Best-

Yourself

Mold Solutions

Phil can help you fix your own property’s mold problems at low-cost, more safely, and better-in- results than what is done by many mold inspectors and mold contractors. How can Phil help you?

     1. Read Phil’s five plain-English, mold advice books to master mold inspection, testing, removal, remediation, and prevention for your house, condo, apartment, office, or workplace.

     2. Buy do-it-yourself, affordable mold test kits, mold lab analysis, video inspection scope, mold cleaner, mold killer, and a mold-killing ozone generator for the successful toxic and household mold inspection, mold testing, mold species identification and quantification, mold cleaning, mold removal, and mold remediation to find mold, kill mold, clean mold, and remove mold from your residence or commercial building.

     3. Get FREE mold advice, mold help, and/or answers to your mold questions, by emailing mold expert Phillip Fry at envirodangers@yahoo.com. You can also email pictures of your mold problems in jpeg file format as email attachments.

Mold Mistakes To Avoid

IGNORING POSSIBLE MOLD HEALTH SYMPTOMS BEING SUFFERED BY ONE OR MORE FAMILY MEMBERS OR CO-WORKERS. Be concerned about possible mold problems if one or more occupants is suffering from unexplained health problems such as an ongoing itchy eyes, bloody nose, sinus problems, headaches, nose congestion, runny nose, skin rashes, skin sores, coughing, breathing difficulties, difficulty in remembering things and in thinking clearly, feeling disconnected from the world around you, and/or chronic fatigue. Please remember that some occupants may experience mold health symptoms, while others may have none, with all living or working in the same mold-infested area. People differ significantly in their sensitivity to mold.
IGNORING HOME MAINTENANCE PROBLEMS & MOLD CLUES. You contribute big-time to becoming a mold victim when you ignore roof leaks, plumbing leaks, sewer line leaks, water stains on ceilings, the indoor smell of mold, visible mold growth, high humidity [60% or more to drive mold growth from humidity alone], a wet or damp basement, and a wet or damp crawl space.
ASSUMING THAT THERE IS NO MOLD PROBLEM BECAUSE OF NO VISIBLE MOLD GROWTH. The worst mold infestation problems are often the ones you cannot see INSIDE floors, ceilings, walls, basement, attic, crawl space, and the heating/cooling equipment and ducts. Airborne mold spores are invisible to the eye, very light, and are easily carried in air current movements or in the air flows of your heating/cooling system to mold cross-contaminate your entire house from just one hidden mold problem. Use our Do It BEST Yourself mold test kits to mold test the air of your basement, attic, all rooms, and the outward air flow from each heating/cooling register for the possible presence of elevated levels of airborne mold spores, in comparison to an outdoor mold control test. Visit: Environmental and Mold Store Use a hidden moisture meter to scan all walls and floors for hidden water problems. Use a fiber optics inspection device to check for mold growth inside wall, floor, and ceiling cavities.
HOPING THAT A NEW HOME IS MOLD FREE. Today’s new homes often come with built-in mold infestation problems because:

          (a) moldy building materials are received from the builder’s supplier---today's timbers are not kiln-dried as in earlier times, and thus contain a high internal moisture content that makes mold growth possible in the timbers;

          (b) the builder and its supervisors and employees fail to do quality control to inspect for, and, thus, prevent moldy building materials from being used in the home’s construction;

          (c) the builder stores the inventory of building materials on the outside ground with no plastic sheeting to protect the building materials from rain [which thus supplies the necessary water to enable mold to grow in and on the materials];

         (d) the construction crew fails to cover the entire home under construction with plastic sheeting at the end of each construction day to protect the building materials from rain [which thus supplies the necessary water to enable mold to grow in and on the materials]. The roof and side walls need to be protected against rain until the entire roof, siding, windows, and doors are totally installed to seal out rain;

           (e) the builder fails to inspect and test the home for mold growth while it is being constructed and at the home’s completion; and

          (f) use of modern building materials like chip wafer boards, drywall (plasterboard), & plywood--- all of which molds love to eat.

           (g) failure to spray all wood-based construction materials on all surfaces with at least one spraying of boric acid mix, available at Mold Mart.
ASSUMING THAT AFTER A WET AREA HAS DRIED, THAT IT IS NOW MOLD SAFE. Mold needs moisture to grow and to multiply as its eats your home building materials and personal possessions. This moisture can come from high indoor humidity [above 60% some or all of the year], roof leaks, siding leaks, and plumbing leaks. If mold spores and mold colony growth run out of moisture, they do NOT die. Instead, they become dormant, and can wait millions of years for access to high humidity or a future water intrusion. Dormant mold can make mold-sensitive persons sick. Even the smell of dormant mold can make some people very sick.
USING OTHER INEFFECTIVE PRODUCTS TO KILL MOLD---such as Kilz, regular paint, paint containing a mildicide element, any paint, Lysol, ammonia, and other household cleaners and disinfectants. Painting over a mold problem does not solve it---it only hides the problem temporarily and gives the mold something delicious to eat---the paint itself.
SPRAYING SOMETHING ON THE MOLD WILL TAKE CARE OF THE PROBLEM. Only EPA-registered fungicides can kill mold, but just spraying visible mold does not solve mold problems. You need to kill all visible mold encountered in mold remediation, but it needs also to be removed from the home or building, and all of the water and mold damaged building materials need to be thrown out and replaced with mold-free building materials. In addition the cleaned out area needs to be treated with a boric acid powder mix. Learn all of the steps required for safe and effective mold remediation at Mold Removal.
TRUSTING THAT MOLD REMEDIATION CONTRACTORS KNOW WHAT THEY ARE DOING. Most mold remediation companies cause and leave more mold problems AFTER the alleged remediation than before their work because of: (a) failure to find and fix all of the mold infestation locations in a home or building due to incomplete mold inspection and mold testing; (b) poor and inadequate training; (c) failure to utilize proper mold containment procedures and effective mold remediation techniques; (d) taking shortcuts that undermine the remediation effort; and (e) sometimes fraud and dishonesty on the part of the contractor. Insist on hiring only a Certified Mold Inspector and Certified Mold Remediatorwho has been trained and certified by the Professional Certification Institute.
TRUSTING THAT INDUSTRIAL HYGIENISTS AND GOVERNMENT AGENCIES ARE EXPERTS IN MOLD PREVENTION, INSPECTION, TESTING, AND REMEDIATION. The only people who truly care about your family’s health and home investment are yourself and your family. Although there are many mold knowledgeable and mold experienced industrial hygienists, most are not. Hiring an industrial hygienist [trained in industrial safety and health] to find and fix mold problems is often like hiring a dentist to treat your heart problems. Hire a Certified Mold Inspector if you value your family’s health and home investment. Some government websites often promote ineffective and outdated mold remediation ideas like using bleach to kill mold. Government employees do not have the personal experience of having to work in the real world to find and kill real mold that is often hidden in home walls, ceilings, floors, heating/cooling systems, attic, basement, and crawl space.